Malicious
Well-Known Member
Hi, got some replacement shoes and drums for my 68 8 3/4 rear end. The shoes I have, have a few differences so I thought I'd check here before I do attempt the install.
Pic below: the first thing is the top hole, which is a cross between a square and a circle. I've pulled the park brake lever off the old shoe, I assume it should just slot into the square/circle, but the hole is slightly undersized. Am I fine to give it a light file?
The second thing is, one shoe from each pair has a lower peg, which my current don't. Are these just not used for my application? Or is the a new way to attach to the park brake cable?
That's it, thanks for your help!
Pic below: the first thing is the top hole, which is a cross between a square and a circle. I've pulled the park brake lever off the old shoe, I assume it should just slot into the square/circle, but the hole is slightly undersized. Am I fine to give it a light file?
The second thing is, one shoe from each pair has a lower peg, which my current don't. Are these just not used for my application? Or is the a new way to attach to the park brake cable?
That's it, thanks for your help!