suggestions ,Good Push or Pull Fan 67 Coronet with Champion Radiator

67 Coronet with 440Ci with a champion Radiator, I Live in Ft Lauderdale its always Hot ,Can I get some suggestions on a good Cooling Fan Maybe a kit ? where the Fan comes on automatic when it hits a certain Temperature.

If you have the room, pullers are more efficient.

I've got a brand new 16" Maradyne electric fan I'd sell. Bought it for my Charger but these Chargers are tight and it wouldn't quite fit. P.M. if your interested.

You don't need a kit either for the wiring, if running a single fan buy a 30 amp relay, a 30 amp breaker and a temp sender for the desired on temp. Very easy to wire and you'll have less that $50 in it.

Pullers are definitely the way to go mostly because you can fully shroud the back and get full draw from the fan whereas a pusher can't be shrouded without restricting the air flow for cruising.

I run a 6 blade steel fan with a clutch on my 472 hemi...26 inch champion rad with two 1 inch tubes....same as with both 498 stroker motors (440)

forgot...shroud also

I've had overheating problems in mine and finally got it solved with a factor shroud & fan + two pushers in front that I bought at AutoZone. There are some thermocouples you can buy to turn the electrics on automatically (adjustable).