This one?you have the wrong thermostat housing to use that hose, the early cars had the taller housing that curved forward. it was made of cast steel.
yes, the no on the radiator is 2445633The original rad in my 64 318 has the top hose connection near the center of the rad. Are you sure the rad you are using is for a 64 sb? How wide is it? I thought the stat housing in 64 is the same for both sb and bb which angles forward but I'm not sure how that would work with the hose to the far right on a bb. I'm looking for the same hose soon.
Using a trimmed Dayco 71281 in my 440 a-body with a 26" radiator.
Radiator is 8-1/2" cap center to inlet center............
True.you have the wrong thermostat housing to use that hose, the early cars had the taller housing that curved forward. it was made of cast steel.
I took the old hose with me for reference.Looked through all the hoses for jussst the right one,,,,,I know it's not a 440 or a B-Body, but when I needed a top hose for my 360 powered A100 Wagon, I just took a homemade template to the local Parts Stores, and went through all the hoses until I found one that was close. I ended up with a GM hose that was about 2" too long...easy fix, cut the hose down and tore the label off....fixed.