• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1971 Satellite project (RR clone)

Status
Not open for further replies.

Chase383

Well-Known Member
Local time
7:18 AM
Joined
Jul 31, 2012
Messages
221
Reaction score
40
Location
Pearland, Tx.
Feedback: 1 / 0 / 0
Contact seller
For Sale: 1971 Plymouth Satellite (RR clone project)

Original 318 auto on column car, was B5 Blue with white interior and canopy top. I had plans of building RR clone to enjoy, but my interests have changed. Original engine and trans are gone. TX title.

Fenders are rough but repairable, decent flat hood with repop Airgrabber bubble and door. One small spot of rust on pass door, drivers' door needs bodywork. Has rust in the lower qtrs and trunk extns. Drivers' front floorpan has a few small holes, pass side is mint, rear floor pans have damage from dual exhaust install, underseat pan is damaged but I have a replacement. A-pillars and roof skin are bad from vinyl top, I have replacement A-pillars. Trunk floor is rust free, frame rails are rust free but the rear rails will need repair due to a homemade trailer hitch. Package try is hacked for bigger speakers but I have a replacement.

New AMD 4-speed tunnel and dual exhaust rear valance. I have an A/C firewall section if someone wishes to convert it to A/C.

I parted out a '71 Charger 500 to option out this car so a huge amount of spare parts are included:

Extra K-member and control arms

2 floor shift steering columns

Bucket seats

A/C Rallye Dash (complete assembly)

A/C box

Power brake booster and linkage

I have two complete sets of glass minus the windshields (tinted and clear)

Two back seats

Rear defrost

Extra set of interior trim panels

Really too many spares to list.

I have two standard bore 383 short blocks that will go with the car.

Correct 8 3/4" rear end minus the center section.

Original Roadrunner grille emblem and horn.

Car is located just south of Houston, Tx.

$4,000 OBO

Picture 001.jpg Picture 132.jpg
 
Back to top... open to offers, but I'm not looking for trades and I don't want to sell parts from the package.

I forgot to add, I have a complete set of rust free frame rails, torsion bar crossmember and shock crossmember from my parts car. They are not need for this car... but I didn't want to throw away parts somebody else could use.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top