• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Bench seat

Status
Not open for further replies.

cbodybob

Well-Known Member
Local time
3:16 AM
Joined
Jan 10, 2014
Messages
1,706
Reaction score
2,128
Location
youngsville, NC
Feedback: 9 / 0 / 0
Contact seller
image.jpg
image.jpg
image.jpg
This seat came with a 66 Belvedere I bought as an extra seat. It won't fit the Belvedere. The seat is the same width. I measure it against the one that was in the Bel. The floor brackets are different so I'm thinking this is for a 68-70 B body. I'm going to put buckets in so I decided to sell this seat. Like I said the seat itself is the same just the brackets are different. $200 plus shipping
 
image.jpg
Ok here are some more pics with measurments. This is accross the underside of the seat edge to edge. Again underside not top
 
image.jpg
This the out side mounting stud to out side stud (left to right)
 
Am going to get our 69 rr out of storage tomarrow will measure it and let you know..
 
Does it have release levers on the back side to fold the seat back forward? Does not apper to that makes it an earlier seat.
 
Does it have release levers on the back side to fold the seat back forward? Does not apper to that makes it an earlier seat.
I do t think it does. That's a good question. I'll check it tomorrow to be sure
 
Status
Not open for further replies.
Auto Transport Service
Back
Top