jeff edwards
Member
anyone have knowledge on swapping a 383 to replace poly motor? torqueflight compatability etc thanx jeff edwards
62 fury poly to 383 swap
- Thread starter jeff edwards
- Start date
Darter6
Well-Known Member
Tranny won't work as the poly is the small bell same as the LA block.K member will work with the right mounts.Look up www.engine-swaps.com for more info.
Last edited:
jeff edwards
Member
thanx darter6 learning curve is steep
Rick62
Well-Known Member
There was a late and early style B engine mount type in '62. My '62 is the early style. The brackets for this style K frame are hard to find. This website and the pictures may be helpful. http://1962to1965mopar.ornocar.com/1962-Dodge-Plymouth-Motor-Mounts.html
I've done this swap many times over the years. If you have any questions don't hesitate to send me a private message. I can't think of any information you might need that you won't be able to find somewhere on the internet. There are a lot of helpful and knowledgeable people on this site.
I've done this swap many times over the years. If you have any questions don't hesitate to send me a private message. I can't think of any information you might need that you won't be able to find somewhere on the internet. There are a lot of helpful and knowledgeable people on this site.
I recently did just what you are talking about on my 62 fury, I changed to duals also. Other than getting a cable shift BB 727 everything else was straight forward.
Drive shaft fit right in. You will need a BB radiator also. Throttle cable was also no issue.
I do have a correct 727 if you need one.
I can get you the top rad hose # .
As a bonus I do have a pair of new dual exhaust tail pipes. They would be from the muffler back.
Let me know. I'll help you.
Nothing like having a 383 BB.
Steve
Drive shaft fit right in. You will need a BB radiator also. Throttle cable was also no issue.
I do have a correct 727 if you need one.
I can get you the top rad hose # .
As a bonus I do have a pair of new dual exhaust tail pipes. They would be from the muffler back.
Let me know. I'll help you.
Nothing like having a 383 BB.
Steve
jeff edwards
Member
thanx for info men , experience is invaluable
Similar threads
