• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1968 B Body non rallye dash harness

Status
Not open for further replies.

'68 Charger

Well-Known Member
Local time
11:44 AM
Joined
Jun 18, 2012
Messages
1,730
Reaction score
573
Location
Akron, Ohio
Feedback: 67 / 0 / 0
Contact seller
For sale is a 1968 B Body non rallye dash harness. For the most part this is a good harness. Ideal if you don't want to spend the big $$$ on a new reproduction one. The flaws are the headlight switch plug terminal has been removed. No wires were cut in doing so, each wire was removed from their cavity of the plastic plug terminal. Also it has the 2 typical lead wire (black & red) defects in the bulkhead. Finally the low beam/high beam floor switch terminal needs attention (new housing). I believe I have another housing for the floor switch that I can include with purchase. Most of the wires are in good shape, no hacks, cuts or burns with exception of the bulkhead and I think just the plastic got damaged.

Overall like I said this can be ideal if you're on a budget. They do sell new bulkhead terminals. Evans Wiring has them. As far as the headlight switch plug terminal I don't believe that those are available reproduction, used only. And for the floor switch I will try to locate it and include it with the sale of this harness as well as put up a pic of it in here.

$50.00 + shipping.

Just an FYI new ones go for: C.I. $469.99 and Y.O. $519.99 WOW
http://www.classicindustries.com/product/mopar/b-body-coronet/parts/mb2443.html
https://www.yearone.com/Product/chrysler-b-body/hu268b

This is for 1968 B Body with oil light (non rallye)

Thanks

20161122_001305.jpg 20161122_001311.jpg 20161122_001316.jpg 20161122_001339.jpg 20161122_001344.jpg 20161122_001349.jpg 20161122_001458.jpg 20161122_001404.jpg 20161122_001510.jpg 20161122_001524.jpg
 
Floor switch plug housing. I can install with the sale of the harness at NO extra cost. No cut and splicing. I will remove the wires from the defective plug and the pigtail plug. Then re-install the harness wires for the floor plug into the pigtail housing.

20161126_190112.jpg
 
Status
Not open for further replies.
Auto Transport Service
Back
Top