How to remove an instrument cluster from a 66 Satellite

e5166ply · Dec 12, 2016

Followed manual instructions..Disconnected all wiring harnesses from behind dash. Unable to remove cluster from dash to disconnect heater/defroster controls. Don't want to damage anything.....can't get the cluster out. Any ideas???

GTXperience · Dec 12, 2016

Are you able to pull it forward at all? Also, did you drop your strg column?

mopar 3 B · Dec 12, 2016

Disconnect the speedo cable and remove the screws from the front of the cluster?

Darthomas · Dec 13, 2016

You have to get it cocked, temp gauge end out some first, then slide it out sideways to the left.... Now there will be a shim spacer along the top edge that was originally taped down at the ends to hold it in place. You want to make sure that gets back in. Seems to me there is a problem with dash light grounding if this is not properly replaced.

mopar 3 B · Dec 13, 2016

Darthomas said:
You have to get it cocked, temp gauge end out some first, then slide it out sideways to the left.... Now there will be a shim spacer along the top edge that was originally taped down at the ends to hold it in place. You want to make sure that gets back in. Seems to me there is a problem with dash light grounding if this is not properly replaced.

Never had that problem with grounding just have to keep the screws tight.

How to remove an instrument cluster from a 66 Satellite

e5166ply

New Member

GTXperience

Well-Known Member

mopar 3 B

Well-Known Member

Darthomas

Well-Known Member

mopar 3 B

Well-Known Member

Similar threads