• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Project Coronet R/T

I am about to refresh mine. It is currently sitting in a wood frame I built for it in the garage. It has not been touched since it left the factory other than me removing it from the car last fall. I can take a bunch of photos tomorrow when I am working out there. Mine is a 68 500 with AC.
Greatly appreciated!
What adhesive did you use to hold the thermal barrier in place? Beautiful car by the way.

Dan
I used 3M 45 general purpose spray adhesive.
 
Good looking color. I am a softie for anything in the brown family.

Keep up the good work.
 
Can't say that the wires are "routed" at all. Just throw the harness from across the room and plug it in where it lands. Should be about right.

DSC_0239.jpg DSC_0240.jpg DSC_0241.jpg DSC_0242.jpg DSC_0243.jpg DSC_0244.jpg DSC_0245.jpg DSC_0246.jpg DSC_0247.jpg DSC_0248.jpg
 
Well here is the finished project one year after starting. Thanks to my friend Rob who did most of the metal repair and wiring issues.
I really had no time to post updates to this forum because we were under deadline to complete. But now if you have any detail questions or require some parts I have much to offer. Enjoy the pics! More to come.
IMG_20170509_094328138.jpg
IMG_20170509_094033628.jpg
IMG_20170509_094043880.jpg
IMG_20170509_094107719.jpg
IMG_20170509_094118608.jpg
IMG_20170509_094235426.jpg
IMG_20170509_094251360.jpg
IMG_20170509_094304048.jpg
IMG_20170509_094328138.jpg
IMG_20170509_094033628.jpg
 
Auto Transport Service
Back
Top