• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What drill bit do I need for the moroso 85820 u-joint girdle?

I wouldn't drill it. I think drilling it weakens the yolk and you will have less thread contact on the bolts. I would find different bolts.
 
There was a reason to not use these, I don't recall exactly why but in the end I didn't use mine and swapped to a dana style yolk instead.

And if I recall, you HAVE to ream out the factory strap yolk in order to use the moroso piece.
 
Montclaire said:
There was a reason to not use these, I don't recall exactly why but in the end I didn't use mine and swapped to a dana style yolk instead.

And if I recall, you HAVE to ream out the factory strap yolk in order to use the moroso piece.
Click to expand...

Don't those caps usually hit the driveshaft when the rear end moves up and down?
 
That sounds right, I think they would be fine if you had a like a 4-link setup but they are not ideal for the street.
 
You must log in or register to reply here.

Similar threads

D
U Joints
Replies
6
Views
853
beanhead
beanhead
jprather
u joint question - 72 satty
Replies
6
Views
538
#41
#41
D
  • Locked
FOUND Dated U Joint Straps for a Dana 60
Replies
0
Views
389
Demon 2048
D
Mopar John
  • Locked
FOR SALE 7260 Small Joint Pinion Yokes 1 Coarse 1 Fine Spline & 1 set of Mounting Bolts
Replies
0
Views
369
Mopar John
Mopar John
E
Steering shaft U JOINT 1963-66
Replies
7
Views
642
EARLY B
E
Auto Transport Service
Back
Top