Al Zangenberg
Well-Known Member
New-In-Box, from Mancini Racing/Mopar Performance Parts:
Part#(MOP) P5249157 Set: .920 Two (2) Torsion Bars. Original Cost: $279.00 They are "On-Sale" @ Mancini; currently for: $254.95
(MRE) QE 173 T-Bar/Boots & Clips Kit. These Mancini Racing torsion bar lock and seal kits are designed to keep the dirt and dust out of your torsion bars. They are made from rubber and include locking clips for installation. Current Cost @ Mancini: $39.95 (Kit includes 2 boots and 2 clips)
These are the 41" (Length) Bars
Application:
Fits: B/E-Body, .920" Diameter, Stock Ride Height, Set (Both the "B" & "E" Body Cars use 41" Length T/Bars). (It wouldn't hurt, to measure yours!).
"Improve suspension performance and increase cornering ability with these torsion bars from Mopar Performance. Designed specifically for use with Dodge and Plymouth B, and E Body cars. Usage: For everything from restorations, to all-out racing. Best of all, they bolt right into the OEM location without modification."
Note: Restoration for 440 C.I. and Hemi cars.
(as-per Mancini Racing Info)
Thus... Torsion Bars & Kit List Price were" $279.00 + $39.95= $318.95
Currently Sale Priced @ Mancini Racing: $254.95 + $39.95= $294.90
NOTE: S&H is extra (Buyer's responsibility) - from my Zip Code in Mount Dora, FL 32757 to yours (?) These will ship in the Original Mancini Box.
Box Measures: 42"-L X 8"-W X 6" H
SHIPPING WEIGHT: (Boxed) Approximately 21 lbs.
NOTE: A word to the wise... NEVER replace just one Torsion Bar! ALWAYS - BOTH! (T/B's are a torsional, twisting spring), and an old Mopar - will have a well-worn set. If yours are scratched, nicked, gouged, (hammered-on), or worse - they should be replaced. There are many who will say: "I've had a 1957 blah-blah-blah...etc. etc....and never had any problem with a torsion bar..." Or: "Well-worn torsion bars, (especially the six-cylinder bars), are perfect for V-8 motors, in a drag car!" (They only go 1/4 mile), or so, and make slow turns, right???!!! Your choice, Gang!
-----------------------------------------------------------------------------
SALE PRICED: $175.00 for Both the T/B's, & The Boots, & Clip Kit!
"A-G-A-I-N!" S&H is extra...so please check with United Parcel Service (U.P.S.), or send me your address & Zip Code, & I'll do the leg work! Just satisfy yourself, with the S&H cost, as I will be making $0.00 on S&H! The cost of the S&H, is mandatory, so you'll know exactly how much to remit to me (via PayPal), & after I verify the cost, you'll have a true & accurate figure...
How's-That?
You may pick-these-up from me, but if require shipping, it will be via UPS (United Parcel Service). Again, my Zip Code is: 32757-9786
P.M. me with any particulars, & send a phone number, where you can be reached, & times when it is convenient for you to receive a phone call.
It is S-O M-U-C-H Easier, to conduct business via the phone, rather than the email alternative!
Payment: PayPal only - with "FRIEND-TO-FRIEND" payment option.
AL
Part#(MOP) P5249157 Set: .920 Two (2) Torsion Bars. Original Cost: $279.00 They are "On-Sale" @ Mancini; currently for: $254.95
(MRE) QE 173 T-Bar/Boots & Clips Kit. These Mancini Racing torsion bar lock and seal kits are designed to keep the dirt and dust out of your torsion bars. They are made from rubber and include locking clips for installation. Current Cost @ Mancini: $39.95 (Kit includes 2 boots and 2 clips)
These are the 41" (Length) Bars
Application:
Fits: B/E-Body, .920" Diameter, Stock Ride Height, Set (Both the "B" & "E" Body Cars use 41" Length T/Bars). (It wouldn't hurt, to measure yours!).
"Improve suspension performance and increase cornering ability with these torsion bars from Mopar Performance. Designed specifically for use with Dodge and Plymouth B, and E Body cars. Usage: For everything from restorations, to all-out racing. Best of all, they bolt right into the OEM location without modification."
Note: Restoration for 440 C.I. and Hemi cars.
(as-per Mancini Racing Info)
Thus... Torsion Bars & Kit List Price were" $279.00 + $39.95= $318.95
Currently Sale Priced @ Mancini Racing: $254.95 + $39.95= $294.90
NOTE: S&H is extra (Buyer's responsibility) - from my Zip Code in Mount Dora, FL 32757 to yours (?) These will ship in the Original Mancini Box.
Box Measures: 42"-L X 8"-W X 6" H
SHIPPING WEIGHT: (Boxed) Approximately 21 lbs.
NOTE: A word to the wise... NEVER replace just one Torsion Bar! ALWAYS - BOTH! (T/B's are a torsional, twisting spring), and an old Mopar - will have a well-worn set. If yours are scratched, nicked, gouged, (hammered-on), or worse - they should be replaced. There are many who will say: "I've had a 1957 blah-blah-blah...etc. etc....and never had any problem with a torsion bar..." Or: "Well-worn torsion bars, (especially the six-cylinder bars), are perfect for V-8 motors, in a drag car!" (They only go 1/4 mile), or so, and make slow turns, right???!!! Your choice, Gang!
-----------------------------------------------------------------------------
SALE PRICED: $175.00 for Both the T/B's, & The Boots, & Clip Kit!
"A-G-A-I-N!" S&H is extra...so please check with United Parcel Service (U.P.S.), or send me your address & Zip Code, & I'll do the leg work! Just satisfy yourself, with the S&H cost, as I will be making $0.00 on S&H! The cost of the S&H, is mandatory, so you'll know exactly how much to remit to me (via PayPal), & after I verify the cost, you'll have a true & accurate figure...
How's-That?
You may pick-these-up from me, but if require shipping, it will be via UPS (United Parcel Service). Again, my Zip Code is: 32757-9786
P.M. me with any particulars, & send a phone number, where you can be reached, & times when it is convenient for you to receive a phone call.
It is S-O M-U-C-H Easier, to conduct business via the phone, rather than the email alternative!
Payment: PayPal only - with "FRIEND-TO-FRIEND" payment option.
AL
Last edited:
