• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 1968 Satellite filler neck

Status
Not open for further replies.

cudak888

Well-Known Member
Local time
4:37 PM
Joined
Apr 25, 2015
Messages
1,165
Reaction score
794
Location
South Florida
Feedback: 3 / 0 / 0
Need one in decent shape with the clamp to hold it in place. Preferably one that's been sitting around for ages, as I need to solder a hose nipple onto it and don't want to go up with the fumes.

-Kurt
 
I have one from a 68 Plymouth Fury. Exits out the rear behind the license plate. May be the very same one used in the B body cars. I can get you a pic if you want
 
I have one from a 68 Plymouth Fury. Exits out the rear behind the license plate. May be the very same one used in the B body cars. I can get you a pic if you want

Sure; that would work.

Come to think of it, let me post a picture up of what the B-body repop looks like (not interested in the repop; I hear the cap fit is horrendous):

MP-68FN.jpg


-Kurt
 
Hum, I think the C body piece has a curve. I'll go by the storage place in a day or two & get a pic.
 
No that's ok. I'd rather get you a pic of the one I actually have. Give me a day or two to get over there. I go there a lot to get parts. No big deal
 
IMG_7242.JPG
It's a bit rusty. It's not as bad as it looks. Blast cabinet is a good thing. The tank had a lot of water in it. And it is curved.
 
Oh well - was worth a shot. Mine is dead straight out from the tank to the cap.

-Kurt
 
I Have a very clean original. $40 plus shipping but missing the bracket but has the clamp. Brackets are easier to find though as most of these necks look like that c-body one pictured above...

IMG_8199.JPG IMG_8200.JPG IMG_8201.JPG
 
Last edited:
I think I have one from a 70 roadrunner. If you still need it..
 
Status
Not open for further replies.
Auto Transport Service
Back
Top