Torkmnstr
Well-Known Member
Hey all, anyone know where I can get the gasket for this trim? It goes in between the body and trims shoot I'm not even sure what to call it...interior drip rail molding, lol. Thanks. I will get pics up in a min.
Trim gasket question
- Thread starter Torkmnstr
- Start date
dieseldazzle
Well-Known Member
Use foam tape cut to fit from ace hardware
Mike67
Well-Known Member
Roof rail weather stripping?
https://www.jimsautoparts.com/weatherstripping.htm
https://www.jimsautoparts.com/weatherstripping.htm
dieseldazzle
Well-Known Member
You'll have to use foam tape I asked on here just a few weeks ago and nobody makes the thin white gasket that was there factory. Second best is foam tape.
Most cars I put together I left it off and just recently stepped up my game enough to start using foam tape there.
Most cars I put together I left it off and just recently stepped up my game enough to start using foam tape there.
slimert
Active Member
I bought a roll of rubber 1" tape with adhesive on one side from Grainger. It's used for hvac duct work. It was about 10 years ago, I've used it for 3 restorations and a little for hvav; still have a lot left!
Mocajava
Well-Known Member
One of our members here, 69Bfan can help. He carries a lot of goodies plus the cat whickers. Chat him up to see if he can help.
Thanks, what we carry is a automotive grade style tape. You can find a similar style tape at the home improvement warehouses that is close. Most of them are slightly thicker. Also if you have an RV center nearby, check with them as well as some camper shells have used similar pieces of tape.
Similar threads
