• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

69 gtx

Looking great...Looks like you are about to venture into one of my most hated areas....Glass.....
 
IMG_20170317_152738016.jpg
Got the coil bracket painted & installed.
 
moparnation74 said:
Looking great...Looks like you are about to venture into one of my most hated areas....Glass.....
Click to expand...
Yes I am. Not really looking forward to it. I will need lots of help, it's been 4 years ago March I tore it apart.
 
I still need to get the vinyl top on also.
 
Didn't have much time last night but I did get the rear seat divider trimmed for the mini tubs.
IMG_20170321_173220309.jpg
 
Something about a interstate or Wal-mart battery in these cars doesn't look cool to me.
 
IMG_20170325_113850198.jpg
well I'm pushing forward with the ac system. I had to cut some of the length off of the stud for the 22 to 26 radiator brackets I made. It was interfering with the condenser bracket.
 
IMG_20170325_114116350.jpg
I drilled a second hole in the bracket to move it up a bit, then clearance the bracket for the opening.
 
IMG_20170325_121036123_HDR.jpg
IMG_20170325_121036123_HDR.jpg
IMG_20170325_121042771.jpg
I put some rubber on the back side of the brackets to keep it from rubbing & squeaking. Straightened all the fins and touched up the paint.
 
IMG_20170325_124933176.jpg
I moved the condenser up a little so the bottom bracket needed moved up also. I had a couple aluminum spacers I made to move up the condenser bracket.
 
IMG_20170325_142826436.jpg
I also put some airflow holes in the bracket while I was at it. Straightened some fins and touch up painted everything.
IMG_20170325_142826436.jpg
 
IMG_20170325_121223340 (1).jpg
The upper pass. side bolt hole was covered by the horn relay. So I used a buttonhead Allen screw for that bracket.
 
IMG_20170325_152122728 (1).jpg
I started taking inventory of the fittings I'm going to need for the ac lines. This is a great tool to have in your box. It will tell you how many threads per inch a fitting or bolt has. And rule out metric hardware.
 
Just ordered my AC fittings & hose from Cold Hose of florida. 6 fittings & hose for 120$. They have a " reduced barrier hose" that isn't as big and bulky. Also bends easier. Hope to have all the stuff by next weekend, and on by the following week.
 
Just got off the phone with Jake from Viking shocks. He found me a front shock that has a little longer stroke and a little shorter compressed length. Should be just right for what I want. James at PST hooked me up. Love this group!
 
Through PST with FBBO discount. 611 for 4. See the thread in suspension.
 
You must log in or register to reply here.

Similar threads

Hammer136
  • Locked
FOR SALE 1969 GTX Legendary Interior
Replies
10
Views
2K
Hammer136
Hammer136
A
New 69 GTX
Replies
17
Views
777
71RRHI
71RRHI
mopar4don
69 Charger door bumper stops not touching!
Replies
14
Views
793
mopar4don
mopar4don
69 GTX
Reforming SS 69 GTX rear window trim?
Replies
17
Views
1K
threewood
threewood
hacksaw
going to do the 62
Replies
17
Views
1K
hacksaw
hacksaw
Auto Transport Service
Back
Top