Replacing torsion bar crossmember bushings

Kernel Sanders said:

Although not the more professional spec I gave the machine shop, these were just my notes used to draw up the spec
View attachment 407271

Click to expand...

Thanks for the sizing. That helps so much, less work on trial and error.

I know, very old thread, but... I have the torsion-bar crossmember bushings from the now-defunct solidbushings.com and realized the bolts they shipped with that go through them are way too big (of course, it's been several years so my fault for not getting around to installing them). Anyway, OEM Chrysler bolts are way too long, so went to find shorter ones, but then realized the bushing holes are too wide for the OEM-sized bolts anyway... Ended up going with axle bolts, for what it's worth, but not sure how these will pan out (fits perfectly within the bushing, and threaded end is the proper size, but they seem a little short and not even sure of the grade!). Anyway, hopefully nothing shears off or breaks...

EDIT: I think I'm just going to go with the Firm Feel ones; $100 isn't worth my life if these bolts decide to give...