Well I managed to get the shop cleaned up finally after the home improvements! Even spent a little time on the X. Got rev 2 of the idle solenoid on and also made sime washers for the stamped steel valve cover. All out of SS. Between the 12 pt small nuts and the stamped steel I figured it could use some help sealing the gaskets. If anyone wants a idle solenoid bracket I have extras. I used the holley one. A friend used the OEM style one from year one but it didn't last a year, so that's why I went this way. I have the phenolic spacers under the carbs so had to adjust accordingly. And make sure it cleared the outboard carb linkage.
