• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 516 Big Block heads

Status
Not open for further replies.

6-david-5

Well-Known Member
Local time
8:11 AM
Joined
Sep 20, 2015
Messages
108
Reaction score
56
Location
L A area
Feedback: 5 / 0 / 0
Contact seller
Up for sale are my 516 heads that I had on my '67 Belvedere. They were pulled just a couple of weeks ago off of the running 383 from this car. They should be rebuilt, however, because the compression readings from this motor were a little low on 3 holes. The engine shook at idle a little, but smoothed out when the RPM's came up, and the darn car actually drove well! But, as stated, they should be rebuilt.
I would much prefer to load these into your pickup bed and trade cash instead of shipping these, but I can ship if it suits you and me best. I think it can be seen that it won't be cheap.
$200 for the 2 cylinder heads only. I have PayPal, but I like cash better. And I'm about 1/2-hour north of Los Angeles.

516%20Cyl%20Heads%20off%2067%20Plymouth%201_zpsurz9z8eh.jpg


516%20Cyl%20Heads%20off%2067%20Plymouth%202_zps1jy8xuxk.jpg


516%20Cyl%20Heads%20off%2067%20Plymouth%203_zpsfe7rhtlb.jpg


516%20Cyl%20Heads%20off%2067%20Plymouth%205_zpsqubc0e0p.jpg


516%20Cyl%20Heads%20off%2067%20Plymouth%207_zpscvzdmhmx.jpg


New%2067%20Belvedere%20compression%20test_zpsy2yuhsf0.jpg
 
FedEx came in at about $125 for shipping both of these heads from SoCal to Georgia. I hope there is someone out there nearby who could use a pair of these!
 
Status
Not open for further replies.
Auto Transport Service
Back
Top