• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 64 Dodge Polara Chromoly Rolling Chassis

Status
Not open for further replies.

lxmodguy

Gen3 Hemi Guru
Local time
10:39 AM
Joined
Apr 18, 2012
Messages
1,233
Reaction score
327
Location
Texas
Feedback: 3 / 0 / 0
Contact seller
Hey Folks,

After years of trying to get this car built I give up. I have north of $50000 into the chromoly rolling chassis. It started as a rust free 383 2bl california car. It has a full chromoly tube chassis and chromoly rear end and 4 link. It has a tubular front K member and tubular front control arms with rackand pinion steering. Wilwood disc brakes. Weld RTS 17 inch wheels in the front and a 15's in the rear with a 325/60/15 M&H Drag radial. It is setup as a small tire car. The chassis is built to hand as much power as you can throw at it. My plans were for 1500-1600 wheel horsepower. It has a fiberglass hood, decklid, and bumpers. I spent about 12k painting the car. It has a beautiful midnight blue metallic on the sides and the flats are all black. All the trim is black. It has a gloss black superstock grill and headlight buckets. It is a beautiful car that will be an amazing one of a kind when finished. I have too many competing priorities and I will never finish it at this rate.

The car is located in North Texas. It is currently at the chassis shop. See links for pictures

Pics - http://www.forbbodiesonly.com/moparforum/threads/my-64-polara-chassis.112583/
http://www.forbbodiesonly.com/mopar...gen3-turbo-build.69486/page-15#post-910238055
http://www.forbbodiesonly.com/mopar...gen3-turbo-build.69486/page-16#post-910288564

$18,000 OBO

I will consider trades. They would have to be solid running and driving cars though
 
Last edited:
Motivated to sell at this point. I will accept a reasonable offer
 
Renewed my gold membership. Two 1 4 five two nine 3951
 
Any pics of the car in its current state? What is it lacking apart from engine/trans to be "complete?"

Thanks.
 
Needs the floor put back in, the steering column, That's really about it. I have every single piece of trim. I have tons of stuff to go with. New parts to go with.. Fuel cell, ice tank, fuel pump, Strange Strac 35 spline (been sitting but new unused).
 
And anything and everything that came on the car minus the buckets and console.
 
By "needs floor put back in" I'm assuming the floor sections are with the car or does it all still need to be fabricated?
 
its a full chassis, will need a fabbed floor.m the wheel tubs are there and my guy can do it. it just hasnt been a priority for either of us in a while
 
Status
Not open for further replies.
Auto Transport Service
Back
Top