aussiewannabee69
Well-Known Member
Will do my best. On the other side of the country for work atm but will get sone up soon.i like that ....more info and photos please
Puddle lights
- Thread starter aussiewannabee69
- Start date
aussiewannabee69
Well-Known Member
Will do my best. On the other side of the country for work atm but will get sone up soon.i like that ....more info and photos please
GetX'd
Making Life Great Again!
- Local time
- 4:22 PM
- Joined
- Jul 20, 2014
- Messages
- 11,771
- Reaction score
- 12,833
- Location
- Laguna Beach, CA
Those are really cool - but not going to cut my door jamb to install. Now if they were battery operated and wireless that's a different story.
Nacho-RT74
Well-Known Member
I don't think a wireless system would be on $20-30 rate!
Nacho-RT74
Well-Known Member
I'm guessing you will need to change the door jam switches if some of them it got single prong setup! Because using single prong setup will make both to turn on with any of the doors being opened. Needs dual prong setup door jam switches for this to make them work individually
aussiewannabee69
Well-Known Member
I didnt need a two prong switch. I ran a new power wire from my fuse box to them and then teed in the earth 's from each switch. The circuit is completed once the door is opened turning the puddle/dome lights on.
Nacho-RT74
Well-Known Member
Yeap of course, but both door jam switches are linked in just one wire net, yellow wire. If you open driver side door will turn on both doors puddle lights at the same time, like turning on the dome light.
To make them work individually need to use dual prongs switches on both doors and use one for the dome light circuit, the other one to each puddle light on each switch
To make them work individually need to use dual prongs switches on both doors and use one for the dome light circuit, the other one to each puddle light on each switch
aussiewannabee69
Well-Known Member
Ah i
Ah i should clarify. Ive made a complete new custom wiring harness. Its a fair bit didferent to the orignal. Im pretty sure thats the same wire that was connected into the door/lights on buzzer? I didnt add that back into my setup.
Ah i should clarify. Ive made a complete new custom wiring harness. Its a fair bit didferent to the orignal. Im pretty sure thats the same wire that was connected into the door/lights on buzzer? I didnt add that back into my setup.
Similar threads
