• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Looking for a measurement from a 70 Challenger or AAR Cuda

multimopes

FBBO Gold Member
FBBO Gold Member
Local time
8:13 AM
Joined
May 6, 2015
Messages
3,018
Reaction score
4,545
Location
Columbia ,NJ
I know this doesn't really fit here but I just want to know if anybody knows somebody with one of the above cars. I just want to know what the exact length of the rear spoilers on those cars are. I tried calling Tony's and 3 or 4 other aftermarket sellers and even though they sell them, they could not give me any info. I want to try adapt one to a B body. There are a couple guys on here who adapted a 69 Camaro spoiler to RR's and I bought one. But before I butcher my cars trunk lid I want to be sure that one of the above would work. Most likely not but I want to do a feasibility study first. I am a purist and want to keep mine all Mopar if possible first. I did not want to join the E body site just to get some numbers. I haven't had a Challenger in 30 years. I also am curious what the width of the Challenger Front spoiler pair is. I have the Boomerang spoilers already but want to see all options before proceeding. I'd like to make my 73 a little more unique instead of out of the box. Thank You
 
I can get you those measurements give me a day or 2
 
Thank you very much! Please, take your time, I am not currently going to do anything until spring. At this stage I am just compiling data. Like I said above, it's just a feasibility study. I have 2 other spoilers that are possibilities. I did not want to join the Ebody site just for some numbers. If I could have gone to a car show in the last few years, I would have measured them myself. The reason I posted this in the A-12 section is that I thought that A-12's are six pak cars. And along those lines, I figured that somebody here might have a friend who had a Challenger TA or AAR Cuda. Maybe I am wrong there too. Like Mrs. Gump said, "Stupid is, as stupid does" or something like that. :rolleyes:
 
The T/A rear deck spoiler is approx. 65 1/4 in length X 5 1/8 in width. The T/A front chins are 21 X 3 1/4 inches.
The AAR rear duck tail spoiler is 62 1/2 X 5 wide, except for where the 3 supports are across the back, it is approx. 5 1/2 wide where they are..
These measurements are from original factory parts and i am sure the repos will vary from that
 
Last edited:
Thank you very much. I noted that Year One now has a T/A made of plastic with molded in studs for approx $100 less but they advertise that it is only for 1970 models. Don't know why. The original style can fit other years but I think some model deck lids don't have holes in the under supports that line up. At least I have something to go on now. Thank you again Moparparts. By the way, what section of PA are you In? I am in NW NJ not far from Stroudsburg.
 
Glad to help, i am about 1 hour NW of Harrisburg
Merry Christmas
 
Same to you and a Happy New Year! By the way, you don't sell Mopar parts do you?
 
Looking for a passenger side (chrome) outside rear view mirror for a 73/74 car only. The hole spacing on the 71to 74 application is wrong (too close).
 
Looking for a passenger side (chrome) outside rear view mirror for a 73/74 car only. The hole spacing on the 71to 74 application is wrong (too close).
Sorry non for the passengers side right now, but Thanks for asking
 
Auto Transport Service
Back
Top