• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Anyone Running a Wiwood Master Cylinder?

dodge68charger

Well-Known Member
Local time
8:30 AM
Joined
Feb 6, 2012
Messages
1,230
Reaction score
81
Location
Washington
Tried Bleeding My Brakes And My Pedals Just as Firm With The Bleeder Screws Open As It Is Closed..


Just Wondering If Anyones Running a Wilwood Master Cylinder With a Factory Power Booster?

Did You Use/modify The Slug That Wilwood Provided Wither Their Master Cylinder..

Pic of Master Cylinder Gap when Master Cylinder Slug Touching Power Booster pushrod.

image.jpeg
 
The Rod Wilwood included Was About 1 1/2''. I Would Have to Shorten It almost 1'' to get the 1/16" gap Thet Wanted Between The factory Pushrod n madter Cylinder Rod.. Not Sure How To even measure That
 
Have you tried installing it without the rod, to confirm its not the rod, need a processes of elimination?
 
Wilwood Said i Must Use It.. I'll Try Tmrw Without It And See If The BleedOr Get Something Different From The Pedal
 
What bore size are you using and what front and rear brakes? Just curious here...
 
I'll check tmrw. Wilwood Called Me Back and said The Pushrod they included doesnt have to be used. I Ordered A 4 to to bolt adapter from summit and hope its thinner than the magnumforce one and Will Work with the power booster rod only. Be here in a week
 
Auto Transport Service
Back
Top