• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 440 Crank Drilled for 4spd

Status
Not open for further replies.

PurpleBeeper

Well-Known Member
Local time
2:52 PM
Joined
Mar 20, 2011
Messages
5,340
Reaction score
4,087
Location
Chicago
Feedback: 2 / 0 / 0
I'm looking for a forged 440 crank drilled for a 4 speed (pilot hole in back). I think a 413/426 crank would work too since I plan to balance the motor. I'm now in the St.Louis area and could drive to meet you as far as maybe 250 miles. What do you have?
 
Stupid question but it’s gotta be asked, forged or cast!
 
Stupid question but it’s gotta be asked, forged or cast!
I'm looking for a drilled forged 440 crank. I "thought" that only forged crank motors got 4-speeds and even when they went to cast crank motors (74 or 75?), if it had a 4 spd it still got a forged crank, but I could be wrong on that.
 
I think I have cast crank, I’ll need to look and see if it’s drilled.
 
I'm looking for a forged 440 crank drilled for a 4 speed (pilot hole in back). I think a 413/426 crank would work too since I plan to balance the motor. I'm now in the St.Louis area and could drive to meet you as far as maybe 250 miles. What do you have?
I've got a couple! Get back to me if you're still in town! I'm 20 min. no of St. Louis
 
That will save some money right there!
 
I'm looking for a drilled forged 440 crank. I "thought" that only forged crank motors got 4-speeds and even when they went to cast crank motors (74 or 75?), if it had a 4 spd it still got a forged crank, but I could be wrong on that.

I am pretty sure your right on the mark. I have a factory stock never apart 78 Ramcharger it has a 400 and a 4 speed and it has a forged crank.
 
I've got a couple! Get back to me if you're still in town! I'm 20 min. no of St. Louis
Thanks Steve, I will send you a pm with my phone number.

Whoops! your inbox is full (so was mine). I just cleared my inbox, so please send me a pm and we'll go from there. I'm taking the wife out to dinner tonight (to butter her up about building another motor), but I will get back to you at least by tomorrow. Thanks
 
Last edited:
Status
Not open for further replies.
Auto Transport Service
Back
Top