- Local time
- 6:48 PM
- Joined
- Apr 13, 2012
- Messages
- 35,490
- Reaction score
- 124,988
- Location
- Granite Bay CA
The engine is a 440/493. I plan to install a new A/C setup from Classic Auto Air. When I put the car together 15+ years ago, I used a radiator with the inlet and outlet correct for a 318. I'm going to need a new radiator with the "nipples" in the stock B/RB location because of the location of the A/C compressor.
Glen Ray sells some good stuff but I am NOT going to pay $1200 for a radiator. The universal Griffin that I have in the car now has never overheated so I am looking at another Griffin model:
http://www.griffinrad.com/load_deta...=1970&make=Dodge&model=Charger&key_id=5-00005
Since the A/C places additional strain on the engine, a shroud is a must. It looks like there is a flange there to mount one.
Has anyone here used this radiator with good results?
Glen Ray sells some good stuff but I am NOT going to pay $1200 for a radiator. The universal Griffin that I have in the car now has never overheated so I am looking at another Griffin model:
http://www.griffinrad.com/load_deta...=1970&make=Dodge&model=Charger&key_id=5-00005
Since the A/C places additional strain on the engine, a shroud is a must. It looks like there is a flange there to mount one.
Has anyone here used this radiator with good results?