• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Lets see all the cool 66-67 b-body mopar pictures.!!

21271057_1677752875576560_2611636438292811972_n.jpg
21272091_1677752872243227_8356100149885574588_n.jpg

My 1966 Coronet 383, work in progress, next up Upper control arms and torsion bar bushings.. riding metal to metal right now..

21271057_1677752875576560_2611636438292811972_n.jpg 21272091_1677752872243227_8356100149885574588_n.jpg
 
I pulled my car out of a field in 90.. Plates had 82 tags on them... Took 18 years before I got to hear the engine start or drive it....

Car online pic.jpg
 
Whats the springs etc you used to get that ride hieght? I'd like to do the same to mine.
Espo 2" over stock springs

Gabriel Guardian Chrysler Imperial Shocks

255/70/15 Futura GLS Tires rear
225/70/15 Front tires

Hellwig 1 3/8" sway bar
I added a front sway bar to help if it had any body roll, it helped a lot too.
 
Espo 2" over stock springs

Gabriel Guardian Chrysler Imperial Shocks

255/70/15 Futura GLS Tires rear
225/70/15 Front tires

Hellwig 1 3/8" sway bar
I added a front sway bar to help if it had any body roll, it helped a lot too.
Did you have any problems with your pinion angle with the 2" lift? I'm getting ready to order Espo springs for my Satellite, and I was figuring on going stock. But I wouldn't mind getting the height up just a little higher.
 
Last edited:
Did you have any problems with your pinion angle with the 2" lift? I'm getting ready to order springs Espo for my Satellite, and I was figuring on going stock. But I wouldn't mind getting the height up just a little higher.
Yeah. Its not horrible but under hard accel its noticeable, I'm gonna see how far its off and order shims. Hopefully $30 shims can correct it. I still insist on ESPO over Mopar Performance, they're better all around.
 
my 67 500

mines ruff....lookin for nice lower quarter patches......theres some nice 66s & 67s(and a few other years) on here.


20170907_125831.jpg


mine hasn't changed much but I'm about to be putting a 528 hemi in and I'm looking for a pin on hood.
 
Very nice, Are those the win lite wheels?

Yep Win lite 15x4.5 up front 15x12 Bead locks out back 390/45-15 M&H Drag Radial. Just got the back wheels today. Going to get them mounted up and hope they fit. I'll post up when I get them on.
 
Got my wheels on yesterday. Should come down a bit once interior and battery go in the trunk.

IMG_3638.JPG IMG_3637.JPG
 
Auto Transport Service
Back
Top