• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 72 CHARGER FRONT FRAME RAILS OR SECTIONS

Status
Not open for further replies.

Tom Patchett

Member
Local time
6:41 PM
Joined
Jul 1, 2017
Messages
22
Reaction score
17
Location
Redmon, Il
Feedback: 0 / 0 / 0
Want good front frame rails or at least from the back bolt hole for the K-member for about 2 feet. Both sides. In Illinois. Thanks
 
Back bolt from the K-member forward? Or back bolt backwards?
 
Back bolt of K-member toward back of car. Need frame section near firewall to rear bolt of K-member. Thanks for helping clear that up.
 
We may have what you need, we bought several, and only need one set. PM me and we can talk.
 
I have a couple of pass side rails
Shipping is expensive
You are better off finding someone
Sort of close
 
Thanks flypaper. Still trying to figure out if other years and models will interchange.
 
71 and 72 b body is what will interchange
 
Those will fit 68-70 and maybe even earlier.
The thing with rails is they are
Large and heavy and shipping can run
More then the part costs.
I could of sold the ones I have a few times
until shipping gets factored in.

unless you go to show like Carlisle
that is how I have moved most big stuff like a rail.
 
Good to know, thank you, I'm only a few hours from him, so the distance wasn't bad, just not a match. Thanks again!
 
Want good front frame rails or at least from the back bolt hole for the K-member for about 2 feet. Both sides. In Illinois. Thanks
I have both front rails I pulled from a 72 Charger, nice and clean. Like someone else mention shipping might be expensive. I'm located east of KCMO.

Mike
 
Thanks Mikedonz, think ralley72 has me fixed up. Thanks to everyone else. Tom
 
Status
Not open for further replies.
Auto Transport Service
Back
Top