• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

PINION ANGLE SHIMS

Yes. 4° steel shims I bought off ebay.
 
yes. They were straightforward to swap in and out. Steel.
 
If you work on these cars much they are nice to have in stock. Yes I've used them on several occasions when swapping or replacing as well as setup for drag use. This is an important function of geometry for longevity of the driveshaft/u-joints.
 
7* down on my drag car (67 Dart).
 
guess i'm the odd ball. quit playing with them, but I do believe there is a time and place for them.
 
snakeoil24 said:
Yes make sure you have a full tank of gas and a angle finder mounted on front snout of rear.
Click to expand...
Im glad you mentioned that. Ive been reading up on them & some say a full tank & some say an empty tank
 
You must log in or register to reply here.

Similar threads

M
Help with pinion angle
2
Replies
28
Views
1K
dvw
dvw
VANDAN
Pinion Angle Shims
Replies
11
Views
1K
Mike67
Mike67
chargervert
Does anyone know what the factory pinion angle is for a 71 Charger R/T Dana 60?
Replies
3
Views
446
hunt2elk
hunt2elk
Triplegreen500
Maybe bit off more than I can chew...Dana 35 rebuild
Replies
9
Views
929
pnora
pnora
K
Driveshaft pinion angle
Replies
3
Views
861
beanhead
beanhead
Auto Transport Service
Back
Top