65wgn440
Well-Known Member
Just curious to see the most power anyone has made with a RB engine running a Torker intake and factory iron heads (not DC stage). Thanks.
Torker combo
- Thread starter 65wgn440
- Start date
Scatpack
Well-Known Member
My super bee with torker intake, holley DP, 30 over, stock air cleaner, stock iron heads with hooker headers made 369 on the dyno.
Scatpack
Well-Known Member
Wheel horsepower
65wgn440
Well-Known Member
Thanks !
Challenger340
Well-Known Member
"back in the day" LOL !
We could run high 9's @ 137-8 mph in a 2950 Lb W/Driver S/Gas Chassis Car, 451 Low Deck, Flat Tappet Cam(.590" Lift) on well Ported Iron 915 Heads using a Torker, But we never Dyno'd back in those days ?
More recently, we've used ancient swap meet acquired Torker's on pump gas, Flat Tappet Hydraulic Cam(XE284H), 030" over 440's using Forged ICON's, well Ported Stealth Heads(280 cfm @ .500) and seen 550 hp Flywheel on the Engine Dyno.
We could run high 9's @ 137-8 mph in a 2950 Lb W/Driver S/Gas Chassis Car, 451 Low Deck, Flat Tappet Cam(.590" Lift) on well Ported Iron 915 Heads using a Torker, But we never Dyno'd back in those days ?
More recently, we've used ancient swap meet acquired Torker's on pump gas, Flat Tappet Hydraulic Cam(XE284H), 030" over 440's using Forged ICON's, well Ported Stealth Heads(280 cfm @ .500) and seen 550 hp Flywheel on the Engine Dyno.
Last edited:
65wgn440
Well-Known Member
How long ago was the 9 sec combo ? A 451 couldn't have been much before 1990 maybe ?? So there were plenty of manifolds available. Did you choose Torker or just maybe had it ??
Darter6
Well-Known Member
I did my 451 in 2000.Ran it with a Torker 383,750 AFB,3500 converter,4.10 gears,27'' slicks.3625LBS with me in it.Complete street trim and using Schumacher 1 5/8 TRI-Y shorty headers. 11.90's all day long.
Similar threads
- Locked
