• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1965 Dodge Coronet Headers RB Engine

Jetblast

Well-Known Member
Local time
12:27 AM
Joined
Jun 24, 2016
Messages
182
Reaction score
53
Location
Cincinnati Area
I am sure it has been covered in seasons past but asking again. Anyone with an RB in a 65 Coronet, or other 65 b body, that fits well? Using Qa1 arms and planning on installing a power Borgeson box.
Any real experience appreciated. Need at least 1 7/8" tubes. Don't want to use fender well.
Thanks in advance for your help.
 
I know you probably heard it before but TTI. Pricey but fit is great. I've had 1 3/4" and 2" in my 65 belvedere. Wouldn't buy anything else.
 
I use 2" tti and the fit is very good. I seen a dart with tti's and borgenson box and that was ugly! the box fit further toward the firewall than stock and header fitment was terrible. I wouldn't consider a borgenson box unless I had cast manifolds.
 
Doug headers hit the passenger side torsion bar. I had to dent the one tube to make them fit. (Ugly)
 
I just looked at my '65 and I don't there's any room to move the steering box towards the rear with tti's.
 
Auto Transport Service
Back
Top