• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Whats everyone working on?

just finished floor pans in the 66 coronet

HPIM1467.JPG HPIM1468.JPG
 
Finished the paint and body. Now, if I can just remember where I put all the pieces.

20180423_163156.jpg 20180423_172651.jpg
 
mocked up front, repaired fenders, glaze on everything, sanded my nuts off, getting ready for a fat coat of epoxy; then I can break it down

IMG_20180417_215022.jpg
IMG_20180425_024708.jpg
IMG_20180425_024722.jpg
IMG_20180425_025600.jpg
IMG_20180425_025655.jpg
IMG_20180425_025934.jpg
IMG_20180425_030002.jpg
 
Working on other peoples stuff while mine sits like usual. Used to work for others for extra money but now it's different...
 
rough body work done, epoxy primed, sanded, and epoxied again...… time to break it down and put it on the spinner



IMG_20180604_171424.jpg
IMG_20180604_171354.jpg
IMG_20180605_164240.jpg
IMG_20180605_164540.jpg
IMG_20180602_181400.jpg
 
Nice dog.

Nice garage.
 
Had to swap out the A999 in my '68 Coronet for a spare A904 I had. I miss the low 1st gear the A999 had.
IMGP0842.JPG
 
Just had the 3.55s replaced with 4.10s in my '66 440 pro street. Wow, what a huge difference.
IMG_1716.jpg
 
Learning to cast aluminum...we built a trash can furnace and started by melting aluminum and pouring into water. It makes for some interesting shapes. We’re going to do some lost foam and green sand castings next.
0AB1C4A9-A846-4E5C-815C-7BAF269FC99B.jpeg
3D2EDCE7-D482-4A0E-A667-31BAA656C580.jpeg
09768A6E-7086-4946-9B79-4CB907D72381.jpeg
16148428-4453-4231-A87D-5252C9075466.jpeg
8D89FD96-B6D2-4998-8B11-9BAE43D46361.jpeg
7C94D312-2CE2-4DA5-A81E-162DEE1E121F.jpeg


 
Auto Transport Service
Back
Top