SteveSS
Well-Known Member
- Local time
- 6:27 AM
- Joined
- May 28, 2013
- Messages
- 4,941
- Reaction score
- 7,579
- Location
- Colorado Springs
The used 3.91 we installed a few years back started clicking real bad. We haven't put but a couple of thousand, albeit hard miles on it. We know very little about rear ends and even less about Sure Grips but we noticed all the bolts of the right side of the unit were backed out and sloppy. See photo. The ones that would be parallel to the axle. I don't know if they are sheared off or just backed out. Can we just unbolt the unit from its carrier and tighten or get new bolts? Any info will be helpful. Sorry for the night time picture.