• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 65 B body 8 3/4 axle assy

Status
Not open for further replies.

Sedanman

Well-Known Member
Local time
9:24 AM
Joined
Apr 13, 2011
Messages
318
Reaction score
70
Location
Chicago
Feedback: 1 / 0 / 0
I'm posting this for one of my customer's customer's 65 Belvedere. He is looking for a factory 8 3/4 axle with or without axles and the closer to northern IL the better. What other years will bolt in with no mods? He spun an axle bearing and it chewed up the housing.Thanks for the ad.
 
Just cut off the housing ends and replace them ?
https://www.summitracing.com/parts/...hXZa4AtE6tvCOd228eVr6acdNkcA5nLBoCqd0QAvD_BwE

msr-7400_w.jpg
 
65 66 67 will bolt in.same width
 
PM me. I have a bare hsg. w/new Yucon axles, tapered brgs., studs, spring seats (need to be welded on). I'm near White Cloud, MI.
Mike
 
65 66 67 will bolt in.same width

And the perches are in the same spot for all three years? He does have new axles so just really needs a bolt in housing. Thanks
 
63,4,5,6,7 as far as I know will fit

Had a 66 rear in my 65 Coronet
 
Good to know, thanks. What was the last year for the castle nut axles?
 
just wondering can the housing from a 64 be used ? or is all throw away.
 
Perch center to center measures 44” and, as pictured, flange to flange of the bare housing is 54-1/4”. $100
 
I have a housing too, with axles. I’ll be driving thru Illinois on my way to Carlisle or I can UPS the housing only. Lmk if you need.

Thanks
Tom
 
Status
Not open for further replies.
Auto Transport Service
Back
Top