• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Running brake lines in 62 fury

peakandscoot

Well-Known Member
Local time
12:30 PM
Joined
Nov 12, 2015
Messages
228
Reaction score
158
Location
Clearwater FL
I have a 62 fury the brake lines were off when i started and i am trying to re run them. Can anyone post some pictures from the rubber rear end line to where it ties into the hard line also the path of travel moving toward the front. I think i am missing a bracket where the rubber line connects to the hard line.
 
Last edited:
I'm not sure what you're looking for. Your auto correct is playing games with you.
20170510_183911.jpg
20170510_185006.jpg
20170510_183922.jpg
20170510_185453.jpg
20170510_185700.jpg
20170510_190457.jpg
20170510_190100.jpg
 
I'm not sure what you're looking for.
Your showing fuel lines, kid. He's asking about brake lines.

Yes, there's a simple bracket, that bolts to the underside, around where the driver's side tail pipe hanger is located. Where the tubing fastens to the hose. Brake lines go kinda like the fuel lines, but on the driver side of the car.
 
Your showing fuel lines, kid. He's asking about brake lines.
Holy Cow! (I'm making an optometrist appt.!)

20170807_154829.jpg
20180214_111627.jpg
20170807_155456.jpg
20170806_172324.jpg
20170722_155816.jpg


Make sure your rear axle housing is at it lowest point of travel when installing the rubber line from the bracket to the block. The line I got was a tad short and I had to tweek the bracket some so there wasn't too much tension on the hose.
 
Auto Transport Service
Back
Top