• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

calling all 1971 RR 4-speed owners HELP

popslavaz

FBBO Gold Member
FBBO Gold Member
Local time
3:30 AM
Joined
Dec 23, 2016
Messages
700
Reaction score
512
Location
Channahon IL.
OK enough drama!!! I am converting my 71 RR to a 4-speed. The favor I need is for someone to please send me a picture of where I need to drill the ghromet hole in the firewall for the dash mounted reverse light wire I have searched every where for a picture but most are automatics. I know where it plugs in on both ends,just need to know where to drill the hole as it is a big one. Thanks for your help! POPS
 
Last edited:
:usflag:

Picture 023 (Small).jpg
 
i don't think there is a exact spot

DSCF7303 (3).JPG
 
I forgot to say firewall location.I know its close to the bulkhead connection and that area has several dimples,just dont know which one to drill. Thanks POPS
 
I will have you covered later
When I can upload some pics I just took:usflag:
 
no Drama for ya Mama
here you go
71 4 speed 383 car :D :usflag:
aoncn7b.jpg
 
Thank You flypaper, It must be the large hole just above the two gas pedal holes. Thats the only hole missing on my automatic fire wall. Thanks Again!! POPS
 
Happy to give the assistance
Good luck with your ride
 
Auto Transport Service
Back
Top