• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

70 Charger resto project

Steve Frederick

New Member
Local time
10:23 AM
Joined
Jul 16, 2018
Messages
1
Reaction score
0
Location
32043
Hi everyone
I'm a newbie here but a lifelong dream was to restore a 69 or 70 charger. I'm getting my wish...and am now knee deep. Looks like I'll need a hood, rear RH full quarter , and lh quarter patch, and a few other metal patches ( not bad)
My question is , I think 69 and 70 rear quarters are the same, but clearly the hood is different. Everything seems to be readily available, except the hood. Any thoughts? I've looked high and low
Thank you!
 
Hello from Pa. and welcome to FBBO. How far along are you? Maybe somebody will start making '70 hoods by the time you get closer to that point when you need it. This is a very good place to ask for recommendations. We like pictures. Have you been here, all '70's? http://1970chargerregistry.com/
 
Last edited:
Welcome to the forum.

Unfortunately, you're stuck looking for used unobtanium 70 hoods, unless you don't mind fiberglass. Used ones show up time to time, but usually come with a price. Fix yours if possible.

70 quarters are different than 69's, but are being reproduced. Fenders and hoods are different as well as tail light trim.

You might want to check on DodgeCharger.com as well.
 
Welcome from Canada,70 qtrs. have different side marker holes than a 69,other than that no issues.70 hood, amd, no go
 
good luck with the 70 Charger project

Welcome to FBBO from hot, dry & sunny NorCal Sierras
 
Good luck and let's see some pics!

I happen to have a spare '70 Charger hood I would part with...
 
Welcome from North Carolina.

yoda_nopic_on_thread.jpg
 
Hello from California!
 
Auto Transport Service
Back
Top