Will 65 Belvedere II 4 door glass interchange with 63 Belvedere 2 door?

Wizard · Jul 22, 2018

I need the passenger glass for my 63 Belvedere 2 door post car. I have a parts car 65 Belvedere II 4 door that is for parts and selling. Will the glass fit in the 2 door passenger door or not? Also what else will interchange into the 63 that would work? Any sheet metal or rails or floors? What else? Interior any thing? I need a whole interior for the 63 except the dash and gauges.

Wizard

fbs63 · Jul 23, 2018

No, the door glass in the 4 door is shorter length wise.

peabodyracin · Jul 23, 2018

Floor pans, trunk floor, frame rails would work but it seems like there were some minor stamping differences in floor pans. The rear seat will fit but the corners on the 4 dr bottom cushion curve more on a 4 dr seat. The vent windows are different because of the tilt of the windshield being different between 63 and 65. Trunk lid should be the same. Rear bumper should be the same. Rear windshield should fit too but the trim on the outside is different. Door latches and strikers are different. Hinges would be the same for hood and front doors. I think the wiper motor setup is basically the same. That's all I can think of.

Wizard · Jul 23, 2018

peabodyracin said:
Floor pans, trunk floor, frame rails would work but it seems like there were some minor stamping differences in floor pans. The rear seat will fit but the corners on the 4 dr bottom cushion curve more on a 4 dr seat. The vent windows are different because of the tilt of the windshield being different between 63 and 65. Trunk lid should be the same. Rear bumper should be the same. Rear windshield should fit too but the trim on the outside is different. Door latches and strikers are different. Hinges would be the same for hood and front doors. I think the wiper motor setup is basically the same. That's all I can think of.

Thanks for all that info. That helps a lot. Anyone else know of anything that will interchange?

Wizard

Wizard · Jul 24, 2018

I have the drivers glass in the door. I need the passenger side glass. Can a glass shop cut/make me door glass for my passenger side window? Will it be right?

Wizard

peabodyracin · Jul 24, 2018

You'd need to find a shop with the patterns. Don't have a good feel for how common that is out your way.

I have a good used passenger door glass, with the lower framework still attached and in good shape. The downside is shipping, which I'd guess would be $40-45 because of weight and size. I'd sell you the glass for $30. I don't know that you could get one cut for $75 but could be wrong.

Wizard · Jul 24, 2018

peabodyracin said:
You'd need to find a shop with the patterns. Don't have a good feel for how common that is out your way.

I have a good used passenger door glass, with the lower framework still attached and in good shape. The downside is shipping, which I'd guess would be $40-45 because of weight and size. I'd sell you the glass for $30. I don't know that you could get one cut for $75 but could be wrong.

Yeah, I was thinking of letting a glass shop use the driver window for the pattern but I would buy yours. Does it have the original marking on it down near the vent window area? You will see it with the window all the way up. Any pics of window/ I can give you e-mail address if you want or post here. Would you ship it Greyhound possibly? My zip would be 17365 to the house and Harrisburg, PA would be the Greyhound terminal. Let me know

peabodyracin · Jul 24, 2018

No glass mfr marks on this one that I can see. Measures about 22 3/4" across the top, starting at the 'notch' in the front, and about 29" near the bottom.

Greyhound is about an hour drive one way for me. Last time I went there at a buyer's request it turned out to be almost $30 more than USPS. That was a 16" motorcycle rim with tire mounted. I've tended to only use them for items too big to ship by USPS.

EARLY B · Jul 24, 2018

Wizard said:
I have the drivers glass in the door. I need the passenger side glass. Can a glass shop cut/make me door glass for my passenger side window? Will it be right?

Wizard

Check AMD I think they repoped the glass

Wizard · Jul 25, 2018

peabodyracin said:
No glass mfr marks on this one that I can see. Measures about 22 3/4" across the top, starting at the 'notch' in the front, and about 29" near the bottom.

Greyhound is about an hour drive one way for me. Last time I went there at a buyer's request it turned out to be almost $30 more than USPS. That was a 16" motorcycle rim with tire mounted. I've tended to only use them for items too big to ship by USPS.

View attachment 629569 View attachment 629570

My driver side has the logo on it. The logo from the 50's and early 60's in the front corner of the glass. Not the pentastar logo. Is this original glass?

peabodyracin · Jul 25, 2018

As you can imagine, I've no idea of the history on the car the glass came from. It appears to have been well cut as the edges are nicely rounded and consistent. Certainly if you went to a glass shop you'd not have the logo in place.

Your decision. Just let me know either way please.

Wizard · Jul 25, 2018

peabodyracin said:
As you can imagine, I've no idea of the history on the car the glass came from. It appears to have been well cut as the edges are nicely rounded and consistent. Certainly if you went to a glass shop you'd not have the logo in place.

Your decision. Just let me know either way please.

Okay, let me look at a few things and will let you know.

Thnks

VANDAN · Jul 25, 2018

EARLY B said:
Check AMD I think they repoped the glass

I just read in one of the Mopar Publications, that AMD is offering Complete/partial glass packages for the '63-'65 2-dr HT & Sedans, & Convertible B-body Cars, clear or tinted, correct thickness, and Chrysler Pentastar logo...

Wizard · Jul 25, 2018

peabodyracin said:
No glass mfr marks on this one that I can see. Measures about 22 3/4" across the top, starting at the 'notch' in the front, and about 29" near the bottom.

Greyhound is about an hour drive one way for me. Last time I went there at a buyer's request it turned out to be almost $30 more than USPS. That was a 16" motorcycle rim with tire mounted. I've tended to only use them for items too big to ship by USPS.

View attachment 629569 View attachment 629570

I was wrong about the location of the Mfr markings. If there are Chrysler markings on the glass it is located right above where the outside door handle is. Not down by the vent wing window where I was saying before. Can you get me a ship quote to me my zip is 17365

peabodyracin · Jul 26, 2018

30 x 26 x 5 box weighing 15 1/2 pds comes in at $37.91 USPS ground (1 week) or $44.05 priority mail (2 day). It's a good solid box with plenty of bubble wrap.

Wizard · Jul 26, 2018

peabodyracin said:
30 x 26 x 5 box weighing 15 1/2 pds comes in at $37.91 USPS ground (1 week) or $44.05 priority mail (2 day). It's a good solid box with plenty of bubble wrap.

Okay, will let you know. You have pay pal ?

peabodyracin · Jul 26, 2018

Wizard said:
Okay, will let you know. You have pay pal ?

I do take paypal. PM me if you wish to proceed and I can provide the paypal address.

peabodyracin · Aug 2, 2018

Any decision yet or should I put the glass away?

Wizard · Aug 3, 2018

peabodyracin said:
Any decision yet or should I put the glass away?

I will take the glass. Let me get back to you this Monday as I have to look at something on car this weekend.

Thnks

Wizard · Aug 6, 2018

Wizard said:
I will take the glass. Let me get back to you this Monday as I have to look at something on car this weekend.

Thnks

I will take the glass. What would be the total for USPS ground?

Will 65 Belvedere II 4 door glass interchange with 63 Belvedere 2 door?

Well-Known Member

Well-Known Member

FBBO Gold Member

Well-Known Member

Well-Known Member

FBBO Gold Member

Well-Known Member

FBBO Gold Member

FBBO Gold Member

Well-Known Member

FBBO Gold Member

Well-Known Member

FBBO Gold Member

Well-Known Member

FBBO Gold Member

Well-Known Member

FBBO Gold Member

FBBO Gold Member

Well-Known Member

Well-Known Member

Similar threads