• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

C Body 11/16 Tie Rods on a B Body

hunt2elk

FBBO Gold Member
FBBO Gold Member
Local time
10:48 AM
Joined
Jul 15, 2009
Messages
10,541
Reaction score
11,692
Location
WI
I am going to rebuild the front suspension on my 69 RR. Noticed on PST's site that an option is to use C body tie rods with the bigger shaft and would then go with solid adjuster as well. Anybody done this upgrade? Is it worth it?
 
I have not done that swap, but I have heard of it. As long as you can adjust the total length to match a b-body & the tie rod ends bolt up, why not?
 
Total bolt on and since it’s 11/16 vs 9/16, you get the flex you would get with the smaller set up. You’ll need 2 inners, 2 outers, and 2 sleeves then your in business. Hell, I even put them on A body’s.
 
Can't tell you if it's worth it...I used them because they look cool. Just being honest.
DSCN0592.JPG
DSCN0594.JPG
 
Thanks guys, I am going the bigger is better and cooler route.
 
Auto Transport Service
Back
Top