• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What did you do to your Mopar today?

Well it does and like I said it just fits it.
 
Replaced the exhaust pipes on the 1955 Plymouth Plaza Suburban with some NOS pieces I found.
phpFVWkjoPM.jpg
phpoCM937PM.jpg
 
traded the 06 daytona for a 98 24 valve cummins. .. still keeping old blue tho. ....

38160584_246707049498100_8967613979987804160_o.jpg
 
Started working on a Power Master alternator installation. I’m also changing the old points type voltage regulator to the newer transistorized style. I’ll do the bulkhead/ammeter bypass as well. Once finished with that, I’ll put the MSD 6AL box and coil on it.
 
Put in some Hi-Test, found a quiet Ocala country road and BURNED SOME RUBBER!!!!!!!!!
What the hell, needed new tires anyway. Now I got an excuse to get em, heh, heh.
 
the next assorted batch of junk that will get primed with dp50 in the next day or 2

20180805_193431.jpg
20180805_193513.jpg
 
some of these parts like the floor pans and 4 speed tunnel are for other future projects
besides the 2 we are currently working on.
with all the junk we have,i always have something around to strip and prime,it is almost never ending..lol
i like to do things in small batches as where we are we try to fly under the radar
it will be nice to have some stuff all ready to go ahead of time down the road.

20180805_193504.jpg
20180805_193446.jpg


20180805_193504.jpg
 
Last edited:
Started to bolt the exhaust pipes to manifolds on the 65' Satellite. Couldn't get the garage below 92degrees. Said - Screw this. And went back in the house.
 
Installed plug wires & dripped sweat on pretty much
tirefryin-Bob said:
Started to bolt the exhaust pipes to manifolds on the 65' Satellite. Couldn't get the garage below 92degrees. Said - Screw this. And went back in the house.
Click to expand...
I hear ya. I started to install plug wires but all i did was drip sweat on everything.
 
washed it yesterday, first time since its been out of the shop. drove her to work today

FullSizeR.jpg 555266876.jpg
 
Drove it 60 miles to try to find someone to paint it that doesn't start pricing at 5K.

I've got about 5K total in the car!

Found a guy advertising on CL that will do it for 2300.

Stumbled into this on the way back. Location noted.

IMG_20180804_123704.jpg
 
What I did for my mopar yesterday. Waited along time to pave rear garage.
y14.jpg
y13.jpg
y12.jpg
y10.jpg
y7.jpg
y8.jpg
y2.jpg
y4.jpg
Before and After.
 
Last edited:
all parts primed up and most of it already stuffed away into the rafters
except for the Bee parts
it had to be sprayed in the early morning as it has been just too hot in the middle of the day to do much around here.
up next is another 71 header panel for a future project
a pair of doors i have been pecking away at and plenty of block sanding on the Bee in between..
what i'm trying to do is get most of the bolt on's done on the next few projects before beating on the shell
that way when i get there
i can slap it together rather quickly
i have too many things all ready to go..

20180806_165728.jpg
20180806_183750.jpg
 
i wish i could do this every day but
you can see what i spend a lot of my free time on..lol

20180806_183834.jpg
20180806_183757.jpg
 
Fran Blacker said:
What I did for my mopar yesterday. Waited along time to pave rear garage. View attachment 635546 View attachment 635547 View attachment 635548 View attachment 635549 View attachment 635550 View attachment 635551 View attachment 635552 View attachment 635553 Before and After.
Click to expand...
OUCH !! that cost ya! Probably won't crack before this Winter, but when it does, be sure to seal up cracks before water-ice gets in them ...the death of asphalt...........................MO
 
You must log in or register to reply here.

Similar threads

PlymCrazy
Finding the history on your vehicle, what did you do?
2 3
Replies
59
Views
5K
PlymCrazy
PlymCrazy
G
On Memorial Day
Replies
15
Views
1K
VANDAN
VANDAN
moparedtn
What did you learn about your Mopar today?
2 3
Replies
52
Views
5K
Pops1967GTX
Pops1967GTX
S
When did you start working on cars?
3 4 5
Replies
84
Views
8K
Builderguy
Builderguy
OG max wedge
What did you do to your 426 on 4/26/2015
Replies
2
Views
1K
rscurtis
R
Auto Transport Service
Back
Top