• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

HEATER HOSE ORIENTATION

Bill Monk

Well-Known Member
Local time
2:59 AM
Joined
Feb 27, 2017
Messages
2,241
Reaction score
2,642
Location
West Virginia
I've looked through past posts and I'm getting conflicting info, on a 69 big block (roadrunner) I believe the hose closest to the block is the core inlet hose and goes to the outer nipple or the one closest to the fender, simple question, is that right?
I'm asking because I'm going to flush the radiator and want to make sure I tap into the right one and make sure they are right in the first place.
 
Last edited:
From my 69 charger. Does this help? Yes wiring is a mess from previous owner.

5F9F92B5-2BA3-4B22-9CB1-97DA3FD17DA3.png
 
The Charger above is incorrect also but it doesn't make any difference on how it works
 
Well thanks guys but if I understand it right, they are wrong but not sure about that
 
The Charger above is incorrect also but it doesn't make any difference on how it works
Gotcha, I just want to make sure I tap into the right hose when I flush it, my understanding was as I said, closest to the block (or intake) is the inlet and goes to the outer most nipple on the core
 
Auto Transport Service
Back
Top