• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Cleaning and Coating Factory Exhaust Manifolds.

the intake I found on craigslist in Cleveland ohio, met a guy in the street in front of an office building in which he worked he was in a suit and tie, a little different from the usual used part pick up, it is an original 1969 1/2 aluminum intake with chyrsler markings ending in 8 instead of six, they were subbed out to edelbrock in 1970 and has the edelbrock logo on the front drivers runner,, unfortunately someone had drilled nitrous ports at the bottom of the runners. I had a friend of mine in Toledo ohio weld the holes shut, which left a slightly noticeable mark, that was the reasoning behind the ceramic coat to camouflage them, worked great, and had to match the heads and exhaust manifold. my fitech 3x2 six pack fuel injection system is supposed to be in after this holiday weekend, plan to have a few more engine parts powder coated black, then maybe get this thing running.
 
This is who I use.....They specialize in Mopar.....They coat the inside and out and also do repairs at a very reasonable price.....

https://www.performancecoatings.com

IMG_1338.JPG IMG_1339.JPG IMG_1340.JPG IMG_1341.JPG IMG_1342.JPG IMG_1343.JPG IMG_1618.JPG IMG_1762.JPG
 
I used Eastwood Exhaust manifold coating cast grey put on with a brush 12.00 for the can you can spray also if they are off the car. Came out great
 
Auto Transport Service
Back
Top