• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

65 Belvedere

The bezels were in fairly good condition to start with. The areas that did need attention were sprayed with a black low gloss high temp paint. Lots of Qtips and lacquer thinner to clean up over spray after drying.
I started taping off the bezel using 1/4" stripping tape. I didn't have enough patience for that. So I resorted to the Qtip method.
 
StreetWedge65 said:
The bezels were in fairly good condition to start with. The areas that did need attention were sprayed with a black low gloss high temp paint. Lots of Qtips and lacquer thinner to clean up over spray after drying.
I started taping off the bezel using 1/4" stripping tape. I didn't have enough patience for that. So I resorted to the Qtip method.
Click to expand...
Thanks!
Mike
 
Not exactly chrome, but I think the AAR bumpers came out OK. Started installing the Legendary seat covers. Fit & finish is really nice.

20180824_155651.jpg 20180824_150349.jpg 20180822_155659.jpg
 
What did you use for paint on the bumpers.. They look great
 
streetwedge did you use your standard bumper hangers. your project is looking great i like the color tone of the interior. going to make the exterior pop even more.
 
I used a Chromabase fine silver. Five coats of Nason clear.
I decided to use the stock bumper brackets. I know, heavy and bulky. But my reasoning was if I get the coins to have my steel bumpers rechromed in the future, it's just a matter of removing the glass ones and bolting on the original steel ones. I like what malex did with his, but I kinda wanted to keep the stock, sleeper look.
 
Finished the seats today. Front seat was a b--ch. Had to completely rebuild it. Foam turned to dust and had to replaced two springs. At any rate, they're done.
Now, SMS says the door panels will ship in the next week or so. Same BS they said back in April, May, June and July.
I'm trying to stay positive.

20180827_165730.jpg
 
its looking really nice the color combo is great. leave the glass bumpers makes people think about it. yep the waiting game on parts suck but it's what it is. enjoy your ride again looks great
 
Wow! SMS set a new record. Received the door panels Friday. After so many false delivery dates, I was beginning to think you could be "Kinda Pregnant".
Cleaning up my original metal uppers and attaching to the panels was a PITA. Either I still had some contamination on the metal or my glue sucked. The vinyl didn't want to stick. I'll definitely try something different on the front panels.

20180902_142933.jpg
 
its really looking good. try cat glue for gaskets that stuff works great i don't have the part number but if want it i can it get it.
 
Thanks, I'll try to find some Cat Glue. Been doing upholstery for years using contact cement. First time I've had any real trouble with it. I'm leaning towards it's gone bad sitting for so long.
 
trust me once you use that cat clue you never go back.
 
i like the green stuff
 
hope i can lean on you when i get to my interior. i know very little about interior
 
Well, she's done. Other than tweeking the carburetor. Seems the air/fuel mixture screws aren't doing much. All four are closed and still ldles fine. Maybe a vacuum leak? Maybe secondaries are cracked open?

20180830_143248.jpg 20180824_150605.jpg 20180824_150210.jpg 20180904_190456.jpg
 
i want to say it looks awesome, your ride looks like one strong street fighter and ready for some track duty. enjoy the music of those pipes and the great smell of peeling asphalt. truly a nice ride
 
You must log in or register to reply here.

Similar threads

S
WTB WTB 1966 Plymouth Belvedere/Satellite Trunk Panel
Replies
6
Views
634
gtx6970
gtx6970
M
  • Locked
WTB 1965 Belvedere I emblems
Replies
4
Views
335
REB6PK
R
Beep!Beep!
  • Locked
FOR SALE 65 Belvedere window cranks and door handles
Replies
0
Views
435
Beep!Beep!
Beep!Beep!
Bbodybobd
  • Locked
WTB Still looking 65 belvedere door panel
Replies
3
Views
497
Bbodybobd
Bbodybobd
robl72
8 3/4 Diff install fluid and friction modifier question
Replies
6
Views
722
snakeoil24
snakeoil24
Auto Transport Service
Back
Top