• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1968 Satellite Parts Car

Status
Not open for further replies.

Answer Book

Well-Known Member
Local time
12:56 PM
Joined
Nov 28, 2017
Messages
165
Reaction score
31
Location
fort scott kansas
Feedback: 1 / 0 / 0
Contact seller
I am very very new to selling PARTS. Please be patient with me. I want to price parts fairly. I do not really know what they are worth and have to TRY and research each part. I don't want to over charge yet not give them away either. You probably know a more fair price than I do so suggestions on prices would be greatly appreciated - EVEN IF - you have no intentions of purchasing and just browsing. I don't really like to haggle but I will. The best situation would be, you make your best no haggle price and I accept.

I have some pictures now and will post more on request.

Not everything on this car is for sale but most of it is. I need a few things for my 68 Road Runner and a couple things someone from here has already requested

I am located in Fort Scott, Kansas and the car is outside Joplin, Missouri

1124171004a.jpg 1124171006a.jpg 1124171004b.jpg 1124171012c.jpg 1124171007b.jpg 1124171006c.jpg 1124171006g.jpg 1124171006f.jpg
 
Looking for a two speed wiper motor and the lever set. Let me know if you could. Thank you.
 
Very good question. I do not have an answer yet. I do not know if I need it or not. I will be going down there next Wednesday to work on car and start removing stuff from other car. I can say this - If I do not need it, you have first dibs on those parts.
 
That’d be great. Thank you!
 
Trunk floor ?
 
Trunk floor ?

That's the only pics I have right now of it, I know its covered and you can not really see it, but it has very little surface rust on it otherwise very good, BUT I am pretty sure I need it for my RR, not positive yet .... floor boards are really good also and I know I dont need them... I will be going back down to my uncles this Wednesday to start removing parts and taking more pics for those folks needing more clear and up close pics of certain items

0922181630.jpg 0922181630a.jpg 0922181630b.jpg 0922181630c.jpg 0922181637f.jpg
 
That's the only pics I have right now of it, I know its covered and you can not really see it, but it has very little surface rust on it otherwise very good, BUT I am pretty sure I need it for my RR, not positive yet .... floor boards are really good also and I know I dont need them... I will be going back down to my uncles this Wednesday to start removing parts and taking more pics for those folks needing more clear and up close pics of certain items

View attachment 657158 View attachment 657159 View attachment 657160 View attachment 657161 View attachment 657162
The valley pan is all I need ...my 70 coronet is from A.Z and sand was trapped between the tank and trunk floor...lil pinholes from sand acting like sponge...

0110182141a.jpg
 
That's the only pics I have right now of it, I know its covered and you can not really see it, but it has very little surface rust on it otherwise very good, BUT I am pretty sure I need it for my RR, not positive yet .... floor boards are really good also and I know I dont need them... I will be going back down to my uncles this Wednesday to start removing parts and taking more pics for those folks needing more clear and up close pics of certain items

View attachment 657158 View attachment 657159 View attachment 657160 View attachment 657161 View attachment 657162
what about driverside floor by gas pedal ?

0111180658.jpg
 
what about driverside floor by gas pedal ?

View attachment 657369
I have not removed any of the carpet yet to check the top side of the floor but the underside looks great... I will know for sure Wednesday and will take more and better pics then. If the floor is in acceptable condition I would have no problem selling it at a fair price to ya... still hafta check trunk part... i know my RR could use it as the RR has couple small holes... but I dont care that much - im not building mine to perfection as lots of your very hard core mopar lovers are doing so i could weld n grind it, b fine with me ... but would look nicer and be easier just to do replacement... so with that being said... still hafta check but I "might" be able to be "talked" out of it
 
I am very very new to selling PARTS. Please be patient with me. I want to price parts fairly. I do not really know what they are worth and have to TRY and research each part. I don't want to over charge yet not give them away either. You probably know a more fair price than I do so suggestions on prices would be greatly appreciated - EVEN IF - you have no intentions of purchasing and just browsing. I don't really like to haggle but I will. The best situation would be, you make your best no haggle price and I accept.

I have some pictures now and will post more on request.

Not everything on this car is for sale but most of it is. I need a few things for my 68 Road Runner and a couple things someone from here has already requested

I am located in Fort Scott, Kansas and the car is outside Joplin, Missouri

View attachment 656665 View attachment 656666 View attachment 656667 View attachment 656668 View attachment 656669 View attachment 656671 View attachment 656674 View attachment 656675
OK.... SO HERE IS THE DEAL..... I am placing a SOLD onto this thread as in I will not be selling any parts off of this car from this thread EXCEPT for the parts already requested by the folks previously. Why? I am going to remove the parts and list them individually. Why? Well I didn't know how this was going to turn out as I have previously stated I don't like to haggle over price and biggest reason why is when I tell someone respectfully no and even why no - Sometimes I get ridiculed and belittled and sometimes insulted and worst of all treated like an idiot........ well it happened right here just a little while ago....... I do not intentionally treat folks like an idiot or insult or ridicule and do not appreciate being treated in that manner..... so to help avoid situations like that I will just advertise parts and not parts car and put a price.... you can still try to offer less if you feel the need to do that but please please do not be offended if I say no, i might say ok but maybe not... like I said I will still honor my commitment to the good folks that have already made requests but no more till listed individually..... sorry to be like this but It's just the principle with me and I am just going to try and avoid any more situations like I had.... please do not ask who and what and why, stuff like that.... my business is mine his is his and ours is ours... and no one elses... well i guess if he gives me a bad report I wouldnt have a problem with defending myself by cut n paste to someone in charge i guess, but I am hoping it is over
 
Status
Not open for further replies.
Auto Transport Service
Back
Top