• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Pro Flo 4. Edelbrock

Hot damn Dennis! ya finally took the plunge, eh ya crazy bastard! lol

Waiting patiently to hear the outcome and your thoughts!

smoking dog.gif
 
Yeah, We should make better time on our road trips now you will only have to stop for fuel when I do.:lol:
 
446E6376-B996-4DCC-94E2-BCAB546EF625.png
Tech says no temp sensor in the Edelbrock Kit. Ordered one from Summit. Had trouble getting some plug out. 6 hours and broken tools. Probably put in by the boys on Lynch Road in May of 69.
 
Still feel like a traitor. Last ride to hear the 850 MIGHTY DEMON oooooowaaaa transition was memorable. Mighty Mopar.

Nah, f all that. You drive the **** out of your car D, it will be a welcome addition, you watch. And she'll still be a Mighty Mopar! Ya just wont hear the giant sucking sound of the secondaries anymore
 
Might have been easier to get a new pump housing. Lol!
 
None yet. Teething over fuel line types and dimensions.

Soon be cramming for Fall Fling.
 
The picture in the sales display looks like it is a single plane. Hard to tell for sure though but it does appear to be taller than stock by a few inches.
I have a Performer RPM on mine and it is a tight fit with even a dropped base air cleaner. As with Dennis, I have a stock hood that I'm not willing to modify. I do hope that this all clears. If this were my project, I'd measure the intake prior to anything else. Returns can be tricky if the parts are installed.

What Kern Dog said. I also run a performer RPM with a low deck b block and 1/2” carb spacer and it’s a tight fit. Measure 3x before any install Dennis.
 
Still feel like a traitor. Last ride to hear the 850 MIGHTY DEMON oooooowaaaa transition was memorable. Mighty Mopar.
WHATEVER you do, DO NOT get rid of the Demon carb until you have achieved at least 2000 miles or more of full shakedown and satisfaction with the EFI. Heck, don’t ever sell it. You may decide to change it back some day.
 
I used 3/8 aluminum supply/return from summitracing; wrapped the lines with thermotec or heatshield products from tank to efi throttle body. so far so good.


watermelon
 
Awaiting lines, figuring out routing. Hope to have car running Friday if no detours.
 
Auto Transport Service
Back
Top