Where to buy Motor Mounts

Jetblast · Oct 10, 2018

I am putting a 1969 440 block in a 65 Coronet and need to buy motor mounts. I would appreciate any advice on who would be a good vendor and if you know of a part number, that would be great . The K member is a V8.
Thanks in advance for any help.

metaldad · Oct 10, 2018

schumacher is where i got mine, for a 440 in my '68 coronet
http://www.engine-swaps.com/

Jetblast · Oct 10, 2018

Thanks again

Mike67 · Oct 10, 2018

I think Mancini carries some too, may be Schumachers...

WileERobby · Oct 10, 2018

I'd recommend a torque strap as well.

Kern Dog · Oct 10, 2018

Check this out:
On some parts store mounts, the stud that connects the insulator/pad to the metal bracket is TOO LONG and contacts the engine block! Be sure to check fitment before tightening everything down. This could result in a crack in the block which is obviously NOT a good thing.

hunt2elk · Oct 11, 2018

I've been using the mounts Mancini sells that has the bolt through the drivers side along with a torque strap and have been happy with that setup. Ran the Schumachers in the past until I had a failure with them.

Jetblast · Oct 12, 2018

Thanks for all the info. I ended up buying some from Schumacher, Mancini sells Schumachers for a few dollars more

Where to buy Motor Mounts

Jetblast

Well-Known Member

metaldad

Well-Known Member

Jetblast

Well-Known Member

Mike67

Well-Known Member

WileERobby

FBBO Gold Member

Kern Dog

Life is full of turns. Build your car to handle.

hunt2elk

FBBO Gold Member

Jetblast

Well-Known Member

Similar threads