• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

71 Charger parts needed

Pumpdoc

Pumpdoc

FBBO Gold Member
FBBO Gold Member
Local time
4:16 PM
Joined
Oct 21, 2018
Messages
93
Reaction score
114
Location
Chalfont, PA
i am in need of the following for my 71 Charger RT
Upper Cowl
Fresh air hood
Left and right front fenders
Deck Lid
IMG_7225.JPG
IMG_7227.JPG
IMG_7228.JPG
IMG_7229.JPG
IMG_7229.JPG
IMG_7230.JPG
 
Don't have any parts you need just wanted to say really neat car. Big Block 4 speed, Dana, Strato vent, N-96, Power windows, Great colors and probably even more!!
 
QuickBpBp said:
Don't have any parts you need just wanted to say really neat car. Big Block 4 speed, Dana, Strato vent, N-96, Power windows, Great colors and probably even more!!
Click to expand...
Thank You! It is tough to find rust free body parts for
 
Pumpdoc said:
Thank You! It is tough to find rust free body parts for
Click to expand...

Agreed I am into 71-2 Plymouths and they are the same way... Luckily I stock piled parts when no one liked them..
What's the story on the car? look like someone tore it apart and left it go for awhile or was it parted and rescued as is?
 
On another note you should ask a MOD to move this post to the Parts wanted section. You may find what you need there in that section.
 
Yes, It sat in Indiana for years. It was someones project that they never got to.
I did post it in the WTB section. Thanks for the heads up!
 
Check over on dodgecharger.com. A guy in flemington, NJ was selling some of the parts you are looking for. Very cool car btw.
 
Thanks for the info. I went to the site but wasn’t able to find it. I appreciate the compliment on the car. I am ready to restore it but I am finding that these parts are very difficult to locate. This is the first time that I have been doing these threads so I’m not real good at it.
 
Sorry it was on moparts. His name is Mike. Post was back in August he posted his Email in that post so I am sharing it here. [email protected]. He had the entire front clip and was selling the entire car.
 
RRGTX said:
Sorry it was on moparts. His name is Mike. Post was back in August he posted his Email in that post so I am sharing it here. [email protected]. He had the entire front clip and was selling the entire car.
Click to expand...

I looked at that car
It was a rotted roach and needed much
 
I need a non ac firewall
When I counted 4 patches
Was too much to bother with for me.
If you needed rails or a roof
Might be about it
Everything else needed help
 
I have a set of real nice fenders
 
Thank you, I might need them. I bought this, a roller body and a front clip for parts. The problem is that this car is way to nice to be a parts car. So now i have two 71 chargers I need parts for.

IMG_9138.JPG IMG_9141.JPG IMG_9142.JPG IMG_9144.JPG IMG_9145.JPG IMG_9147.JPG IMG_9148.JPG IMG_9150.JPG
 
My team is in the process of removing the mice
 
Wow thats nice for a parts car..the fenders I have were never installed on a car they were primed and edged in purple you can see the original primer where the paint is peeling off basically Nos
 
3C240CA3-F5D7-4A4B-9023-0A078201110A.jpeg
Ok, you are in Jersey? That’s good I’m not far from you.
John
 
That car is original paint. The paint is still good. 40,000 original miles. Hardly any rust. Frond end damage. Plain Jane with a 383 2bbl
 
You must log in or register to reply here.

Similar threads

Tim Nist
  • Locked
SOLD 1970 Dodge Charger fenders
Replies
2
Views
782
davek
davek
M
1971 charger drum to disks
Replies
2
Views
612
Moparkrazed
M
DZefyr
  • Locked
WTB 74 Roadrunner Body Parts
Replies
0
Views
414
DZefyr
DZefyr
Rusty34
Correct AC Compressor Brackets for a 71 Charger 383 4bbl?
Replies
2
Views
685
Rusty34
Rusty34
M
  • Locked
FOUND 71-74 buckets
Replies
4
Views
645
Moparsal
Moparsal
Auto Transport Service
Back
Top