• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1968 Plymouth GTX bumper mounted turn signal assembly

'68 Coronet R/T

Well-Known Member
Local time
11:18 PM
Joined
Jul 26, 2018
Messages
592
Reaction score
1,511
Location
Arizona
Does anyone know where I can purchase these?
My car came with only the left one and all I can find are lenses and gaskets.
Front damage.jpg


I have a complete parts list for 1968 Mopars that gives me part # 2853 032-3 but that hasn't produced anything on my searches either.
 
To my knowledge, nobody reproduces the complete housing assembly, just the lens as you have found. They should be readily available as all 68 to 69 Plymouth B-Bodies used the same assembly. If they are reproduced, I still think that I would rather have an original piece unless it was severely pitted up or the pig tail harness has been cut on. You might want to post in the Parts Wanted section.
 
i bought them but if I have an extra I'll give you a very good deal; I'll know within a week or two.
 
I will charge be what I paid or less. I'm not here to make money on anything.
 
Please don't take a loss on it for me. I am just glad to possibly find one.
 
As much as I know no one reproduces these yet. Tony’s Parts has a set on his website and there is a set on eBay right now for $350.
 
Auto Transport Service
Back
Top