• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1971 Dodge Charger SE Parting Out

Status
Not open for further replies.
I think I have the two from the upper quarters behind the rear window on the sail panel area - are those the ones you need?
 
ok, I will pull them out, snap a photo and send to you, then you let me know if you are interested.
 
Found them - here are some pics front and back. They are in nice shape - just need the colors in the middle freshened up

39C3FCB7-3E20-4093-A6C3-5141F1D0DD83.jpeg 6E72FD9A-4D23-411C-99C5-7021002DBDCB.jpeg
 
looking for a pulley for Federal power steering pump - 7" in diameter
what condition are the bucket seats? Are they black? Mine are white but I'd consider replacing and recovering if they are in great shape.
 
I have the entire PS pump - came off a 318 and I have two sets of bucket seats - both are the early 71 design with the metal trim around the push button. both need to be recovered. One is a mixed set with one black and one tan but the springs and tracks are decent. The other is a tan matching set with cloth inserts and are a bit more rusty. They would be very heavy and large to ship and I am on Long Island NY
 
Looking for the passenger side front wheel opening chrome
 
the only chrome I have left is the SE top of doors, top of fenders, top of hood, bottom of hood, bottom of windshield
 
sorry no - I had to find one on Ebay myself and it wasn't cheap
 
Any pics of the buddy seat and do you have the floor brackets?
 
Here is a pic of the seat - unfortunately like a bone head I tossed the brackets with the floor pans when I cut them out

83FA9935-A301-4ADB-908D-6D2EF7E50EC9.jpeg 175CC82F-C6F8-41A6-BFF7-E1DBC6EFB21B.jpeg 914F1103-0031-40F2-80D5-A56F08FC57FA.jpeg AEF88539-8354-4364-8AAB-2D26F9718335.jpeg
 
cdkmbjones said:
I have some parts left from a 1971 Dodge Charger SE 318/auto a/c car that I purchased about two years ago for some parts I needed for my project car.
For sheet metal, all that remains is the flat hood, roof, tail panel.
I have the engine, trans, 8 1/4 rear, driveshaft
Bucket seats, buddy seat, rally gauges w wiring harness, misc plastic interior panels
Misc window regulators, tinted glass
A/C parts for a 318
A/c Heater box complete with controls, vacuum lines, etc
Many brackets, bumpers, linkages
If you have specific needs let me know
Just know - no fenders, doors, quarters are left.
Click to expand...
Do you have rear bumper brackets
 
Do you need fenders?
 
at this point no - I could have used them last winter but the car is all done - just minor tweaking here and there like the fact I am finding the headlight doors open but don't close.
Had the motor rebuilt and if I jump it out it works great. I am quite sure the relay isn't switching polarity when the headlight switch is turned off so I have to find another relay or do the Bosch relay update.
I may have to consider selling the car after everything due to some family needs but I am trying to work it out so that is not necessary - very frustrating!
 
Status
Not open for further replies.

Similar threads

Beepedout70
  • Locked
FOR SALE 1971-72 Rallye Gauges and woodgrain insert
Replies
0
Views
321
Beepedout70
Beepedout70
challengerz
  • Locked
FOR SALE 72 Charger parting out
2
Replies
20
Views
3K
challengerz
challengerz
Schober Motorsports
  • Locked
FOR SALE Parting Out 1966 Dodge Coronet
Replies
16
Views
2K
Schober Motorsports
Schober Motorsports
K
  • Locked
FOR SALE Parting out a 1975 charger
Replies
0
Views
898
kyle340
K
M
WTB Looking for 1969 Dodge Charger RT SE for restoration.
Replies
0
Views
162
Mopar6870
M
Auto Transport Service
Back
Top