Seat belt removal 1969 Coronet.

1969CoronetR/T · Nov 5, 2018

I want to replace my front lap seat belts in my 1969 Coronet. Does the large headed bolt just screw into the floor board without a nut under the car? I looked under the car and there does not seem to a nut fastened to the interior bolt so I am assuming it just screws into the interior floor board?
Thanks

66383 · Nov 5, 2018

Just screws into the floor on my 66.

67 GTX · Nov 5, 2018

I believe you are correct. Under the car there is a welded in support piece of rectangular metal that has a nut part of it.

beanhead · Nov 5, 2018

Yep there's inserts behind the sheet metal. I like to chuck up the 13/16" socket in my cordless drill set it on low gear and spin them out that way

moparnation74 · Nov 5, 2018

Check to see if they have debris or undercoat on them. Clean the threads before removal......

YY1 · Nov 5, 2018

Yep, they are factory "lock bolts" and take forever to remove unless you use air or electricity.

Seat belt removal 1969 Coronet.

1969CoronetR/T

FBBO Gold Member

66383

DETAILS MATTER!

67 GTX

Well-Known Member

beanhead

May I Land My Kinky Machine

moparnation74

Well-Known Member

YY1

Well-Known Member

Similar threads