danf_fl
Well-Known Member
Engine misses at 35 mph and carb backfires on acceleration.
Plugs, wires, dist cap, rotor are new.
I replaced points with a module and changed the coil (and ballast resistor for fun).
It's a 383 changed to 4bbl with a mild cam. Bored 0.40 over, flat top pistons.
Heads have hardened seats to run unleaded.
Compression is good. Fuel tank, sender unit replaced.
Too much fuel from carb?????
What could I be missing?
Plugs, wires, dist cap, rotor are new.
I replaced points with a module and changed the coil (and ballast resistor for fun).
It's a 383 changed to 4bbl with a mild cam. Bored 0.40 over, flat top pistons.
Heads have hardened seats to run unleaded.
Compression is good. Fuel tank, sender unit replaced.
Too much fuel from carb?????
What could I be missing?