• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 72 Charger Full vinyl top moldings

Status
Not open for further replies.

NoCar2023

Well-Known Member
Local time
8:36 AM
Joined
Jun 25, 2016
Messages
2,422
Reaction score
7,231
Location
CA
Feedback: 0 / 0 / 0
Looking for these moldings for a full vinyl top.
72 SE coupe/hardtop appear to be the same.
Thanks.
SE vs Coupe Hardtop moldings.PNG
Here are the 6 pieces I am missing.
79701-48037505995da2651fd3be4a950d1328.jpg
 
Last edited:
I have the rear pieces for sure and the side pieces just need to know the length to make sure. The corners are reproduced I would buy them new...
 
I have the rear pieces for sure and the side pieces just need to know the length to make sure. The corners are reproduced I would buy them new...
Okay, I don't know the length, do you want me to measure the area that receives the molding?
 
Yes cause I don't know if those qtr. panel pieces are the same on 71 Charger with door belt moldings.. The side trim is not marked but is for door belt molding for sure and I don't know if they are different or same length due to the window difference...
 
Yes cause I don't know if those qtr. panel pieces are the same on 71 Charger with door belt moldings.. The side trim is not marked but is for door belt molding for sure and I don't know if they are different or same length due to the window difference...
71 is different.
I will measure and post pics.
 
Yes cause I don't know if those qtr. panel pieces are the same on 71 Charger with door belt moldings.. The side trim is not marked but is for door belt molding for sure and I don't know if they are different or same length due to the window difference...
Here is a 71, the molding meets the belt molding at the corner.

71 vinyl top molding.PNG
 
Here is a 71, the molding meets the belt molding at the corner.

View attachment 688562

I think a 71 WITH door belt moldings is a different length...That trim piece shown is different cause it is "open" at both ends to transition to the other pieces where the V. Top side trim is tapered to a finished "point" where it meets the door belt trim...
 
I see, the 71 pictured has NO belt molding, I am searching for a 71 with belt molding.
 
Found one.
You are correct sir. appears to be the same for 71.

71 with belt molding.PNG
 
I have a set with one broken corner if things don't work out.

I have the broken piece and I believe JB Weld will fix it so it can't be seen.
 
I have a set with one broken corner if things don't work out.

I have the broken piece and I believe JB Weld will fix it so it can't be seen.

Ok, thanks.
 
Here are the side Qtr. pieces. If they are what you need I will post pics of the back pieces.... Pm and let me know and we will go from there.. Thanks!

IMG_0179.JPG IMG_0180.JPG IMG_0181.JPG IMG_0182.JPG IMG_0183.JPG
 
Status
Not open for further replies.
Auto Transport Service
Back
Top