milsdodge
Member
Trying to locate heater duct tubes for my 66 coronet,also looking for plastic defrost end
Heater ducts for 66 coronet
- Thread starter milsdodge
- Start date
- Local time
- 11:35 PM
- Joined
- Dec 25, 2011
- Messages
- 5,259
- Reaction score
- 6,351
- Location
- White Cloud, MI
Hi there Milsdodge,
I believe I can help you. I have the complete heater assy. from my 66 Belvedere which should be the same? I'll check today.
I will send you any parts you want for the cost of shipping only.
Mike LeFevre
Rick62
Well-Known Member
NAPA has various sizes of heater and defroster duct tube.
https://www.napaonline.com/napa/en/p/NDP7301113/NDP7301113
https://www.napaonline.com/napa/en/p/NDP7301113/NDP7301113
milsdodge
Member
from milsdodge. Want to thank 493 Mike and Rick 62 for there help. I didn't think it would be so simple. For an old shadetree hotrodder this is a new learning curve. Again Thank you
Mike in Boston
Well-Known Member
I am looking for the right defrost plastic vent if somebody has one kicking around.
Brent
Member
Did you ever find any ? I’m looking as well. The rectangular one for the vent in middle of the dash.
ODZKing
Well-Known Member
Chances are the ends are broken. Most of them are.
If so, washers from the hardware store and a touch of JB Weld will take care of the problem.
If so, washers from the hardware store and a touch of JB Weld will take care of the problem.
If anyone has the passenger side defrost vent sitting around, I would be interested.
Reproduction vents for the 66 and 67 B-Bodies are very close to being released.
milsdodge
Member
This would be great, worth taking the dash apart.
Similar threads
